wiring duct-RCCN » Tubes http://www.wiring-ducts.com wiring duct-RCCN Fri, 28 Jan 2011 07:35:01 +0000 http://wordpress.org/?v=2.8.4 en hourly 1 Vinyl Wire End Caps http://www.wiring-ducts.com/vinyl-wire-end-caps-2/ http://www.wiring-ducts.com/vinyl-wire-end-caps-2/#comments Sun, 04 Oct 2009 06:26:30 +0000 admin http://www.wiring-ducts.com/?p=460

 

  

Material: Soft P.V.C.
Maximum service temp: 80°C
For the insulation works of wire end terminal. Perfroming the work with
a simple one-touch to tighten and seal against dirt, moisture and water.
Standard color: Red, white, blue, yellow black.
(Green, brown available on special request)
Item No. Wire Suitable D1 D2 D3 L F B T PACK
V-1.25 1.25 2.8 3.3 3.1 13±2.0 6±1.0 7±1.0 0.6+0.3
　　-0.2		 1000
V-2 2 3.3 4.5 3.7 14 9 7 0.7 1000
V-3.5 3.5 4.2 5.7 4.1 17 9 8 0.8 1000
V-5.5 5.5 4.8 5.7 5.2 17 10 8 0.8 1000
V-8 8 6.2 7.2 6.2 19 14±1.2 9 1.0 1000
V-14 14 7.5 10 8 25±2.4 15 11±1.2 11±0.3 100
V-22 22 10.5 12 9.5 30 17.5 15 1.2 100
V-38 38 12.5 14 11.8 34 20 16.5 1.5 100
V-60 60 15 16.8 13.5 39 25±1.5 19 15 100
V-80 80 17 19 16 47±3.0 30 22±1.5 16±0.4 100
V-100 100 19 22 18 54 30 24 1.7 50
V-125 125 21 24 20 57 32 25 1.8 50
V-150 150 23 24.5 22 65 35 30 2.0 25
V-200 200 27 32 24 65 35 30 2.0 20
V-250 250 29 38 26.5 77±4.0 35±2.0 42±2.0 2.5±0.6 20
V-325 325 29 38 29 77 37 40 2.5 20
V-400 400 39 44 37 86 47 39 2.5 10
V-500 500 40.5 45 39.5 86 47 39 2.5 10
V-630 630 47 52 45 92 48 44 2.5 10
]]> http://www.wiring-ducts.com/vinyl-wire-end-caps-2/feed/ 0 Heat Shrinkable Tube http://www.wiring-ducts.com/heat-shrinkable-tube/ http://www.wiring-ducts.com/heat-shrinkable-tube/#comments Sun, 04 Oct 2009 06:25:15 +0000 admin http://www.wiring-ducts.com/?p=458

  

Standard: .224  VW-1
C-. CSA C 22.2 OFT

Characteristics:
1.Do not contain eight heavy metal elementsa and four
  halogen elements.Passed SGS test.
2.Donot contain organic stannum compound,Asbestos,Azo 
  Compounds and Formaldehyde.
3.Operating Temperature：-55℃～125℃.
4.Shrinkable Temperature:Start at 70℃,and shrunk
  totally at 110℃(for thin wall);or 120℃(for normal 
  wall),longitudinal shrink ratio:≤±5%.
5.flexible,flame retardant.
6.The Available sizes form Φ0.6～Φ180mm,Can produce 
  upon customer’s special requirement.
7.Easy for use,using oven or heating gun and it will 
  shrink.
8.Meet Sony and RoHS standard.
Standard colors:  Black,Red,Yellow,Green,Purple,Blue,Grey,Brown.

 

Technical Data:

PROPERTY

Test Method 

Standard 

Physical

 Tensile Strength(MPa) GB/T1040 ≥10.4
Elongation(%) GB/T1040 ≥200
Tensile Strength after Aging(MPa) . 224
158℃×168hr		 ≥7.3
Elongation after Aging(%) . 224
158℃×168hr		 ≥100
Heat Resisitance . 224
250℃×4hr		 No viscidity,
No cracking

Electrical

 Cold Blend . 224
-30℃×4hr		 No cracking
Dielectric Strength(kv/mm) GB/T1408 ≥15
Dielectrc Withstand 150V . 224 No breakdown for 1500V
600V . 224 No breakdown for 2500V
Volume resistance(Ω.cm) GB/T1410 ≥1×1014

Chemical

 Anti Corrosion . 224
158℃×168hr		 PASS
Conpper stability . 224
158℃×168hr		 PASS
Flammability . 224 VW-1
Environment Friendly Characteristics 

Hazardous
element 

Test Method 

Result(mg/kg)

Hazardous
element

Test Method

Result(mg/kg)

Cd EN1122:2001Method B ≤5 As EPA 3052 ≤50
Pb EPA 3050 B ≤90 Se EPA 3052 ≤25
Sb EPA 3050 B ≤60 F EN 14582 Method B ≤200
Ba EPA 3050 B ≤1000 Cl EN 14582 Method B ≤800
Cr EPA 3050 B ≤5 Br EN 14582 Method B ≤800
Hg EPA 3052 ≤5 I EN 14582 Method B ≤200
 
Item No.

 
Size

 
As Supplied (mm)
After Shrinkage (mm)
 pack
CableRange
Inside
Diameter
(min.)D
Wall
Thickness
(nominal)w
Inside
Diameter
(max.)D1
Wall
Thickness
(nominal)w
HST-0.6 Φ0.6 0.9±0.3 0.10±0.08 ≤0.40 0.22±0.10 200 0.4-0.7
HST-0.8 Φ0.8 1.0±0.3 0.15±0.08 ≤0.50 0.22±0.10 200 0.6-0.8
HST-1 Φ1.0 1.5±0.3 0.15±0.08 ≤0.65 0.28±0.10 200 0.75-0.9
HST-1.5 Φ1.5 2.0±0.3 0.15±0.08 ≤0.65 0.28±0.10 200 0.75-0.9
HST-2
 		 Φ2.0 2.5±0.3 0.18±0.08 ≤1.00 0.40±0.10 200 1.1-1.8
HST-2.5 Φ2.5 3.0±0.3 0.18±0.08 ≤1.30 0.40±0.10 200 1.35-2.3
HST-3 Φ3.0 3.5±0.4 0.18±0.08 ≤1.50 0.40±0.10 200 1.6-2.7
HST-3.5 Φ3.5 4.0±0.4 0.22±0.08 ≤1.80 0.42±0.10 200 1.85-3.2
HST-4 Φ4.0 4.5±0.4 0.25±0.08 ≤2.00 0.45±0.10 200 2.1-3.6
HST-4.5 Φ4.5 5.0±0.4 0.25±0.08 ≤2.30 0.50±0.10 100 2.35-4.0
HST-5 Φ5.0 5.5±0.4 0.25±0.08 ≤2.50 0.55±0.10 100 2.6-4.5
HST-6 Φ6.0 6.5±0.4 0.28±0.08 ≤3.00 0.55±0.10 100 3.1-5.4
HST-7 Φ7.0 7.5±0.4 0.28±0.08 ≤3.50 0.55±0.10 100 3.7-6.3
HST-8 Φ8.0 8.5±0.5 0.28±0.08 ≤4.00 0.60±0.10 100 4.2-7.2
HST-9 Φ9.0 9.5±0.5 0.30±0.10 ≤4.50 0.60±0.10 100 4.7-8.0
HST-10 Φ10 10.8±0.5 0.30±0.10 ≤5.00 0.60±0.10 100 5.2-9.0
HST-11 Φ11 11.5±0.5 0.30±0.10 ≤5.50 0.60±0.10 100 5.7-10
HST-12 Φ12 12.5±0.5 0.30±0.10 ≤6.00 0.65±0.10 100 6.2-11
HST-13 Φ13 13.5±0.5 0.35±0.12 ≤6.50 0.65±0.10 100 6.7-12
HST-14 Φ14 14.5±0.5 0.35±0.12 ≤7.00 0.70±0.10 100 7.3-13
HST-15 Φ15 15.5±0.6 0.40±0.12 ≤7.50 0.75±0.10 100 7.8-14
HST-16 Φ16 16.5±0.6 0.40±0.12 ≤8.00 0.75±0.10 100 8.3-15
HST-17 Φ17 17.5±0.6 0.40±0.12 ≤8.50 0.75±0.10 100 8.8-16
HST-18 Φ18 19.0±0.7 0.40±0.15 ≤9.00 0.80±0.15 100 9.3-17
HST-20 Φ20 22.0±0.7 0 0.40±0.15 ≤10.00 0.82±0.15 100 10.4-19
HST-22 Φ22 24.0±0.7 0.40±0.15 ≤11.00 0.82±0.15 100 11.4-21
HST-25 Φ25 26.0±0.7 0.55±0.15 ≤12.50 1.00±0.15 50 12.8-24
HST-28 Φ28 29.0±0.7 0.55±0.15 ≤14.00 1.00±0.15 50 14.4-29
HST-30 Φ30 31.5±0.7 0.55±0.15 ≤15.00 1.05±0.15 50 16-29
HST-35 Φ35 36.5±0.7 0.55±0.1 ≤17.50 1.15±0.15 50 18-34
HST-40 Φ40 41.5±0.7 0.55±0.15 ≤20.00 1.20±0.15 50 21-39
HST-50 Φ50 51.0±0.7 0.55±0.15 ≤25.00 1.20±0.15 25 26-49
HST-60 Φ60 60.0±0.8 0.60±0.15 ≤31.00 1.30±0.20 25 35-55
HST-70 Φ70 70.0±0.8 0.65±0.15 ≤36.00 1.47±0.20 25 40-65
HST-80 Φ80 80.0±0.8 0.70±0.15 ≤41.00 1.47±0.20 25 45-75
HST-90 Φ90 90.5±0.8 0.70±0.15 ≤46.00 1.47±0.20 25 50-88
HST-100 Φ100 100.5±0.8 0.70±0.20 ≤51.00 1.47±0.20 25 55-95
HST-120 Φ120 120.5±0.8 0.70±0.20 ≤61.00 1.56±0.20 15 65-115
HST-150
 		 Φ150 150.5±0.8 0.70±0.20 ≤76.00 1.56±0.20 15 80-115
HST-180 Φ180 180.5±0.8 0.70±0.20 ≤91.00 1.56±0.20 15 95-115
]]> http://www.wiring-ducts.com/heat-shrinkable-tube/feed/ 0 Yellow & Green Heat Shrink Tubing http://www.wiring-ducts.com/yellow-green-heat-shrink-tubing/ http://www.wiring-ducts.com/yellow-green-heat-shrink-tubing/#comments Sun, 04 Oct 2009 06:24:04 +0000 admin http://www.wiring-ducts.com/?p=456

  

Product Introduction:
Yellow/Greem is made from excellent yellow,green polyethylene material by special method.This products has excellences of soft,
flammabillity,fast shrinking,bright color stand,stable performance.RoHS standard etc.the tube is universally
applied to wire or cable middle earth wire marks, special wire cable or conduit marks etc.
Characteristics:
1.Operating Temperature:-55℃～125℃;
2.Shrink Ratio:2:1，3:1;
3.Sfrink Temperature:Start at 70℃;shrunk totally at 120℃,Lognitudinal Shrink ratio≤±8%;
4.Soft,high flammability,bright stable color;
5.Convenient usage,heating shrink by oven or hot gun;
6.RoHS compliant.
 
Standard color: Yellow&Green striped
 
 
Item No.

 
Size

 
As Supplied (mm)
After Shrinkage (mm)
 Std.Pkg.
M
CableRange
Inside
Diameter
(min.) D
Wall
Thickness
(nominal)W
Inside
Diameter
(max.)D1
Wall
Thickness
(nominal)W
HST-0.6YG Φ0.6 0.9±0.3 0.10±0.08 ≤0.40 0.22±0.10 200 0.4-0.7
HST-0.8YG Φ0.8 1.0±0.3 0.15±0.08 ≤0.50 0.22±0.10 200 0.6-0.8
HST-1YG Φ1.0 1.5±0.3 0.15±0.08 ≤0.65 0.28±0.10 200 0.75-0.9
HST-1.5YG Φ1.5 2.0±0.3 0.15±0.08 ≤0.65 0.28±0.10 200 0.75-0.9
HST-2YG
 		 Φ2.0 2.5±0.3 0.18±0.08 ≤1.00 0.40±0.10 200 1.1-1.8
HST-2.5YG Φ2.5 3.0±0.3 0.18±0.08 ≤1.30 0.40±0.10 200 1.35-2.3
HST-3YG Φ3.0 3.5±0.4 0.18±0.08 ≤1.50 0.40±0.10 200 1.6-2.7
HST-3.5 YG Φ3.5 4.0±0.4 0.22±0.08 ≤1.80 0.42±0.10 200 1.85-3.2
HST-4YG Φ4.0 4.5±0.4 0.25±0.08 ≤2.00 0.45±0.10 200 2.1-3.6
HST-4.5YG Φ4.5 5.0±0.4 0.25±0.08 ≤2.30 0.50±0.10 100 2.35-4.0
HST-5YG Φ5.0 5.5±0.4 0.25±0.08 ≤2.50 0.55±0.10 100 2.6-4.5
HST-6YG Φ6.0 6.5±0.4 0.28±0.08 ≤3.00 0.55±0.10 100 3.1-5.4
HST-7YG Φ7.0 7.5±0.4 0.28±0.08 ≤3.50 0.55±0.10 100 3.7-6.3
HST-8YG Φ8.0 8.5±0.5 0.28±0.08 ≤4.00 0.60±0.10 100 4.2-7.2
HST-9YG Φ9.0 9.5±0.5 0.30±0.10 ≤4.50 0.60±0.10 100 4.7-8.0
HST-10YG Φ10 10.8±0.5 0.30±0.10 ≤5.00 0.60±0.10 100 5.2-9.0
HST-11YG Φ11 11.5±0.5 0.30±0.10 ≤5.50 0.60±0.10 100 5.7-10
HST-12YG Φ12 12.5±0.5 0.30±0.10 ≤6.00 0.65±0.10 100 6.2-11
HST-13YG Φ13 13.5±0.5 0.35±0.12 ≤6.50 0.65±0.10 100 6.7-12
HST-14YG Φ14 14.5±0.5 0.35±0.12 ≤7.00 0.70±0.10 100 7.3-13
HST-15YG Φ15 15.5±0.6 0.40±0.12 ≤7.50 0.75±0.10 100 7.8-14
HST-16YG Φ16 16.5±0.6 0.40±0.12 ≤8.00 0.75±0.10 100 8.3-15
HST-17YG Φ17 17.5±0.6 0.40±0.12 ≤8.50 0.75±0.10 100 8.8-16
HST-18YG Φ18 19.0±0.7 0.40±0.15 ≤9.00 0.80±0.15 100 9.3-17
HST-20YG Φ20 22.0±0.7 0 0.40±0.15 ≤10.00 0.82±0.15 100 10.4-19
HST-22YG Φ22 24.0±0.7 0.40±0.15 ≤11.00 0.82±0.15 100 11.4-21
HST-25YG Φ25 26.0±0.7 0.55±0.15 ≤12.50 1.00±0.15 50 12.8-24
HST-28YG Φ28 29.0±0.7 0.55±0.15 ≤14.00 1.00±0.15 50 14.4-29
HST-30YG Φ30 31.5±0.7 0.55±0.15 ≤15.00 1.05±0.15 50 16-29
HST-35YG Φ35 36.5±0.7 0.55±0.1 ≤17.50 1.15±0.15 50 18-34
HST-40YG Φ40 41.5±0.7 0.55±0.15 ≤20.00 1.20±0.15 50 21-39
HST-50YG Φ50 51.0±0.7 0.55±0.15 ≤25.00 1.20±0.15 25 26-49
HST-60YG Φ60 60.0±0.8 0.60±0.15 ≤31.00 1.30±0.20 25 35-55
HST-70YG Φ70 70.0±0.8 0.65±0.15 ≤36.00 1.47±0.20 25 40-65
HST-80YG Φ80 80.0±0.8 0.70±0.15 ≤41.00 1.47±0.20 25 45-75
HST-90YG Φ90 90.5±0.8 0.70±0.15 ≤46.00 1.47±0.20 25 50-88
HST-100YG Φ100 100.5±0.8 0.70±0.20 ≤51.00 1.47±0.20 25 55-95
HST-120YG Φ120 120.5±0.8 0.70±0.20 ≤61.00 1.56±0.20 15 65-115
HST-150YG
 		 Φ150 150.5±0.8 0.70±0.20 ≤76.00 1.56±0.20 15 80-115
HST-180YG Φ180 180.5±0.8 0.70±0.20 ≤91.00 1.56±0.20 15 95-115
]]> http://www.wiring-ducts.com/yellow-green-heat-shrink-tubing/feed/ 0 Dual Wall Heat Shrinkable Tube http://www.wiring-ducts.com/dual-wall-heat-shrinkable-tube/ http://www.wiring-ducts.com/dual-wall-heat-shrinkable-tube/#comments Sun, 04 Oct 2009 06:22:45 +0000 admin http://www.wiring-ducts.com/?p=454

  

 Product Introduction:
Adopt Flame retardant,cross-linked polyilefin,with an inner coating of hot-melt adhesive and an outer layer that shrinks to provide electrocal and mechanical protection.Insulates and seals a variety of electrical wirings.
Characteristics:
1.operating Temperature:45℃~125℃;
2.Shrink Temperature:Start at 70℃;shrunk totally at 120℃;
3.Inner layar glue melt temperature:70℃~90℃;
4.Shrink ratio:3:1，4:1,Longnitudinal Shrink radio≤±8%;
5.Waterproof,RoHScompliant.
Standard color: Black(Other color available upon request.)
 
Item No.

 

 Size

 
Size

 
As Supplied (mm)
After Shrinkage (mm)
 PACK
CableRange
Inside
Diameter
(min.)D
Wall
Thickness
(nominal)
Inside
Diameter
(max.)D1
Wall
Thickness
(nominal)
SCM-01 1/8 Φ3.2 3.2±0.6 0.30±0.08 ≤1.0 0.95±0.08 200 1.0～3.1
SCM-02 3/16 Φ4.8 4.8±0.6 0.46±0.08 ≤1.5 1.10±0.08 100 1.8～4.6
SCM-03S 1/4 Φ6.4 6.4±0.6 0.50±0.08 ≤2.2 1.20±0.08 100 2.4～6.4
SCM-03L 5/16 Φ7.9 7.9±0.6 0.52±0.08 ≤2.7 1.30±0.08 100 2.9～7.7
SCM-04 3/8 Φ9.5 10.2±0.6 0.55±0.08 ≤3.2 1.40±0.08 1.22M/PCS 3.4～9.4
SCM-05 1/2 Φ12 12.7±0.6 0.68±0.08 ≤4.2 1.50±1.0 1.22M/PCS 4.4～12.5
SCM-06 5/8 Φ15 15.0±0.6 0.71±0.10 ≤5.2 1.80±1.0 1.22M/PCS 5.4～14.8
SCM-07 3/4 Φ19 19.0±0.8 0.76±0.10 ≤6.3 2.00±1.0 1.22M/PCS 6.5～18.8
SCM-11 1″ Φ25 25.4±0.8 0.78±0.10 ≤8.5 2.10±1.0 1.22M/PCS 8.8～25
SCM-13 1 1/4 Φ30 30.0±0.8 0.80±0.10 ≤10.2 2.20±1.0 1.22M/PCS 11～30
SCM-15 1 1/2 Φ39 39.1±1.0 0.85±0.10 ≤12.7 2.40±1.0 1.22M/PCS 14～40
SCM-17 - Φ44 44.0±1.0 0.95±0.10 ≤13.0 2.70±1.0 1.22M/PCS 14～44
SCM-20 2 Φ52 52.0±1.0 0.95±0.10 ≤17.0 3.00±1.0 1.22M/PCS 18～49
SCM-23 2 1/2 Φ64 64.1±1.5 0.95±0.10 ≤21.2 3.00±0.15 1.22M/PCS 22～62
SCM-27 3 Φ75 75.0±1.5 1.00±0.15 ≤25.5 3.20±0.15 1.22M/PCS 26～75
SCM-35 3 1/2 Φ90 90.0±1.5 1.00±0.15 ≤30.0 3.30±0.15 1.22M/PCS 32～88
SCM-40 4 Φ100 100.0±1.5 1.20±0.15 ≤34.0 3.50±0.15 1.22M/PCS 36～99
SCM-50 5 Φ125 125.0±1.5 1.20±0.15 ≤42.0 3.50±0.15 1.22M/PCS 44～125
]]> http://www.wiring-ducts.com/dual-wall-heat-shrinkable-tube/feed/ 0 Adhesive-lined Semi-rigid Heat Shrinkable tube http://www.wiring-ducts.com/adhesive-lined-semi-rigid-heat-shrinkable-tube/ http://www.wiring-ducts.com/adhesive-lined-semi-rigid-heat-shrinkable-tube/#comments Sun, 04 Oct 2009 06:21:24 +0000 admin http://www.wiring-ducts.com/?p=452

  

Product Introduction:
1.Apply to electrical insulation and seal of   wire or power cable joint,termination and   component,and etc;
2.4;1shrink radio could be applied to cover a  wider range of joint and component.
3.Semi-rigid and high mechanical capability   makes the tube provide excellent wearable  ptotection for power cable joint terminatio  -n and other component;
4.The thick adhesive forms a fluid-proof and  moisture-proof ptotective layar; 
5.Operation temperature:-45℃～125℃;
6.Minimum shrink tempeature:+125℃;
6.RoHS compliant,the outer layer is sell-  extincted.
 
Standard color: Black(Other color available upon request.)
4:1
Technical Data:

Property

Test Method

Stantard
Tensile Strength(MPa) ASTM D2671 ≥14
Elongation at Brealk ASTM D2671 ≥200
Longitudinal shrink ratio .224 ≤±10%
Volume Resistance ASTM D876 ≥1×1014
Flame Resistance .224 Outer layer is self-extinct
Copper stability 158℃,168hrs .224 Pass
Water Absorption ASTM D570 ≤0.5%
Hot Melting Adhesive Property

Property

Test Method

Stantard
Water Absorption ASTM-D570 <0.2%
Vicat Softening Point ASTM-E8 95℃
Peel Strength(PE) ASTM-D1000 120N/25m
Peel Strength(AL) ASTM-D1000 80N/25m
Specification:
  Size As Supplied Total W.T.(mm) Standard Length (m/pc)
mm inch Min.I.D. Max.I.D. Total W.T. Adhesive thickness
  Φ6.0   6 1.27 1.30±0.15 0.56±0.15 1.22
  Φ8.0 5/16 8 1.65 1.65±0.15 0.76±0.15 1.22
  Φ12.0   12 2.41 2.00±0.15 1.02±0.15 1.22
  Φ18.0   18 4.45 2.50±0.15 1.37±0.15 1.22
]]> http://www.wiring-ducts.com/adhesive-lined-semi-rigid-heat-shrinkable-tube/feed/ 0 PTFE (Teflon) Rod http://www.wiring-ducts.com/ptfe-teflon-rod/ http://www.wiring-ducts.com/ptfe-teflon-rod/#comments Sun, 04 Oct 2009 06:20:31 +0000 admin http://www.wiring-ducts.com/?p=450   

Standard:
. fire No:
 .224VW-1C. CSA22.2O

Product Introduction:
PTFE Tube manufacture by extrusion process with PTFE has excellent chemical resistance,heat resistance,weather resistance.It widely used in Science&Technology field,such as in chemistry,
instruments,mechanical industries,communications
etc.
Characteristics:
1.Operating Temperature:-80℃~260℃;
2.Excellent anti-corrosion(anti-acild/alkaline/chemical/oil);
3.High voltage resistance(45kv/mm).
Standard color: clear.
 
Technical Data:

 Property

Stantard

Property

Stantard
Relative density 2.14～2.20 Melting point(℃) 327
Tensile Strength(MPa) ≥25 Operating temperature(℃) -80～260
Tensile bend Strength(MPa) ≥11 Oxygen index(%) >90
Elongation(%) ≥300 Water absorption(%) <0.01
bending elongation >300 Linear dilatability index
(×105/℃)21～100℃		 10
shore durometer(D) 59～63 Dielectric strength(kV/mm) ≥45
    Volume resistance(Ω.cm) 1×1014
Item No.

 
Size

 

 D
mm
 V  W
Std.Pkg.
M
S
T
L
TFL-0.30 Φ0.30 0.30±0.10 0.80 0.70 0.60 305
TFL-0.38 Φ0.38 0.38±0.10 0.88 0.78 0.68 305
TFL-0.46 Φ0.46 0.46±0.10 0.96 0.86 0.76 305
TFL-0.56 Φ0.56 0.56±0.10 1.16 1.06 0.86 305
TFL-0.66 Φ0.66 0.66±0.10 1.26 1.16 0.96 305
TFL-0.71 Φ0.71 0.71±0.10 1.31 1.21 1.01 305
TFL-0.81 Φ0.81 0.81±0.10 1.41 1.31 1.11 305
TFL-0.86 Φ0.86 0.86±0.10 1.66 1.46 1.16 305
TFL-0.96 Φ0.96 0.96±0.20 1.76 1.56 1.26 200
TFL-1.07 Φ1.07 1.07±0.20 1.87 1.67 1.37 200
TFL-1.19 Φ1.19 1.19±0.20 1.99 1.79 1.49 200
TFL-1.34 Φ1.34 1.34±0.20 2.14 1.94 1.64 153
TFL-1.50 Φ1.50 1.50±0.20 2.30 2.10 1.80 153
TFL-1.68 Φ1.68 1.68±0.20 2.48 2.28 2.00 100
TFL-1.93 Φ1.93 1.93±0.20 2.73 2.53 2.25 100
TFL-2.16 Φ2.16 2.16±0.25 2.96 2.76 2.50 100
TFL-2.41 Φ2.41 2.41±0.25 3.21 3.01 2.76 150
TFL-2.69 Φ2.69 2.69±0.25 3.49 3.29 3.04 150
TFL-3.00 Φ3.00 3.00±0.25 4.00 3.80 3.40 150
TFL-3.38 Φ3.38 3.38±0.25 4.38 4.18 3.78 100
TFL-3.76 Φ3.76 3.76±0.25 4.76 4.56 4.16 100
TFL-4.22 Φ4.22 4.22±0.25 5.22 5.02 4.72 00
TFL-4.72 Φ4.72 4.72±0.25 5.72 5.52 - 50
TFL-5.28 Φ5.28 5.28±0.30 6.28 6.08 - 1m/PCS
TFL-5.94 Φ5.94 5.94±0.30 6.94 6.74 - 1m/PCS
TFL-6.68 Φ6.68 6.68±0.30 7.68 7.48 - 1m/PCS
TFL-7.46 Φ7.46 7.46±0.30 8.46 8.26 - 1m/PCS
TFL-8.38 Φ8.38 8.38±0.30 9.38 9.18 - 1m/PCS
]]> http://www.wiring-ducts.com/ptfe-teflon-rod/feed/ 0 Heat Shrinking Sleeve Pvc http://www.wiring-ducts.com/heat-shrinking-sleeve-pvc/ http://www.wiring-ducts.com/heat-shrinking-sleeve-pvc/#comments Sun, 04 Oct 2009 06:19:17 +0000 admin http://www.wiring-ducts.com/?p=448

  

Material: Rigid Shrinkable P.V.C.
Used for color distinction and insulation of busbar in controll
panel. To be shrinked by blower or hot water.
Maximum service temp.: 80oC
Item No.
LAY FLAT
Dimension
A
Convert to
DiaØ
B
 
Shrinkable
Range
Color
 
Packing
HS-6.5 6.5 4.1 6.5~3.6 R.W.B.BK
100M
HS-8.5 8.5 5.2 8.5~4.5
HS-12 12 7.6 12~6.5
HS-15 15 10 15~5.8
HS-20 20 13 20~11
HS-30 30 19 30~16
HS-40 40 25 40~22
HS-50 50 32 50~28
HS-60 60 38 60~33
HS-70 70 44 70~37
HS-80 80 50 80~42
HS-100 100 63 100~55
HS-120 120 76 120~65
HS-150 150 95 150~90
HS-170 170 108 170~94
HS-200 200 127 200~110
]]> http://www.wiring-ducts.com/heat-shrinking-sleeve-pvc/feed/ 0 Hexagonal Protection Cap http://www.wiring-ducts.com/hexagonal-protection-cap/ http://www.wiring-ducts.com/hexagonal-protection-cap/#comments Sun, 04 Oct 2009 06:06:21 +0000 admin http://www.wiring-ducts.com/?p=446   

Material:PA66
ITEM NO NUT Dimension PACK
HPM-8 8M As  Figure 100PCS
]]> http://www.wiring-ducts.com/hexagonal-protection-cap/feed/ 0 Hot Air Gun http://www.wiring-ducts.com/hot-air-gun/ http://www.wiring-ducts.com/hot-air-gun/#comments Sun, 04 Oct 2009 05:59:40 +0000 admin http://www.wiring-ducts.com/?p=445   

 

Item No.
Dimension
NEG-3A
120°C~590°C  1600W 220V,
HG-3A
120°C~590°C  1600W 220V,
]]> http://www.wiring-ducts.com/hot-air-gun/feed/ 0