Adhesive-lined Semi-rigid Heat Shrinkable tube
   |
| Product Introduction: 1.Apply to electrical insulation and seal of wire or power cable joint,termination and component,and etc; 2.4;1shrink radio could be applied to cover a wider range of joint and component. 3.Semi-rigid and high mechanical capability makes the tube provide excellent wearable ptotection for power cable joint terminatio -n and other component; 4.The thick adhesive forms a fluid-proof and moisture-proof ptotective layar; 5.Operation temperature:-45℃～125℃; 6.Minimum shrink tempeature:+125℃; 6.RoHS compliant,the outer layer is sell- extincted. Standard color: Black(Other color available upon request.) 4:1 |
| Technical Data: | ||
|
Property |
Test Method |
Stantard |
| Tensile Strength(MPa) | ASTM D2671 | ≥14 |
| Elongation at Brealk | ASTM D2671 | ≥200 |
| Longitudinal shrink ratio | .224 | ≤±10% |
| Volume Resistance | ASTM D876 | ≥1×1014 |
| Flame Resistance | .224 | Outer layer is self-extinct |
| Copper stability 158℃,168hrs | .224 | Pass |
| Water Absorption | ASTM D570 | ≤0.5% |
| Hot Melting Adhesive Property | ||
|
Property |
Test Method |
Stantard |
| Water Absorption | ASTM-D570 | <0.2% |
| Vicat Softening Point | ASTM-E8 | 95℃ |
| Peel Strength(PE) | ASTM-D1000 | 120N/25m |
| Peel Strength(AL) | ASTM-D1000 | 80N/25m |
| Specification: | |||||||
| Size | As Supplied | Total W.T.(mm) | Standard Length (m/pc) | ||||
| mm | inch | Min.I.D. | Max.I.D. | Total W.T. | Adhesive thickness | ||
| Φ6.0 | 6 | 1.27 | 1.30±0.15 | 0.56±0.15 | 1.22 | ||
| Φ8.0 | 5/16 | 8 | 1.65 | 1.65±0.15 | 0.76±0.15 | 1.22 | |
| Φ12.0 | 12 | 2.41 | 2.00±0.15 | 1.02±0.15 | 1.22 | ||
| Φ18.0 | 18 | 4.45 | 2.50±0.15 | 1.37±0.15 | 1.22 | ||
